|
Automatic Power Factor
Controller Panel |
| |
|
Need for APFCP & Features of SERVOMAX -APFCP
In view of constantly rising power tariff & penalties imposed by the State
Electricity Boards / Utility companies, it is imperative for any HT & LT
Industry / Consumer to install an automatic power factor controller system for
curtailment of Power Factor penalty and also to Save Energy by consistently
maintaining higher power factor. Low Power Factor leads to poor power
efficiency, thereby increasing the apparent power drawn from the distribution
network. This results in overloading of Transformer, Bus bars, Switch gears,
Cables and other distribution devices within the Industry or consumer area.
Servomax power factor correction system ensures optimum power for the running
loads thereby:
|
 |
|
| |
|
The Present day electrical networks cater
to variety of non linear loads (like UPS, Soft Starter, VFD etc.) Which
dynamically fluctuates and creates Waveform distortion thereby necessitating
installation of APFC Panel with line filter. The above facts warrant the
consumer to install an ideal AUTOMATIC POWER FACTOR CORRECTION (APFC) SYSTEM in
order to:
-
Avoid Penalization for lower power
factor.
- Enjoy incentives for higher power
factor operation being extended to Industries by some Electricity Boards/ Companies.
- Optimize the connected load for
improved plant load factor.
- Avoid manual disruption.
- Avoid high current consumption losses.
- Improvement in voltage regulation.
- Decrease Maximum Demand KVA, thus
avoiding penalty and
Demand Charges.
|
| |
|
SERVOMAX APFC PANELS |
-
SERVOMAX has wide range of APFC Panels with 6 stage, 8 stage, 14 stage
controllers
-
SERVOMAX APFC Panels are available in the range of 20 KVAr to l000KVAr
-
SERVOMAX APFC Panels have built in surge suppression network for each
switch to suppress the dangerous surges generated while operating power
factor correction.
|
|
ADDITIONAL ADVANTAGES |
The additional advantages of operating
your entire factory with APFC Panels are:
- Minimizing the Line Losses, thus
saving Power Consumption.
- Longer life for all electrical
circuits, cables, bus bars , switches, motors etc.
- Decrease in the downtime and
enhanced performance of the connected equipments.
- Curtailment of Leading Power
Factor.
- Reduction of Current Consumption
Charges.
- Accelerated depreciation can be
availed in the first year itself.
- Modular design for easy
installation, operation and maintenance.
|
|
DESIGN FEATURES |
- Microprocessor based
controller with four-quadrant measurement .
- Self-adaptable with short reaction
time for extremely fluctuating power levels.
- Provided with reliable, long
lasting components including heavy duty, dry type Capacitors.
- Application based system,
configuration with Multi-bank capacitors, multi stage protection and
safety devices.
- Surge suppression and harmonic
trapping inductors are incorporated as a optional features.
- Wide ranges available from 20 KVAr
to 1000 KVAr in single module. Multi module construction for higher
ratings.
|
|
RANGES OF APFC PANELS |
|
|
Wall mountable Automatic Power Factor
Correction Panels
- SERVOMAX-APFC/30
- SERVOMAX-APFC/40
- SERVOMAX-APFC/50
- SERVOMAX-APFC/60
Self standing Automatic Power Factor
Correction Panels with Stand
- SERVOMAX-APFC/60
- SERVOMAX-APFC/70
- SERVOMAX-APFC/80
Wide ranges of Automatic Power Factor Correction Panels are available in
single module. Multi Module constructions are available for higher ratings.
We also undertake manufacturing of any custom built panels as per site
specification
|
|
|
|
|
|
